Flashing Guide Samsung Galaxy S6 and Samsung Galaxy S6 Edge

Hello droiders got the Samsung Galaxy S6 and Samsung Galaxy S6 edge ? in this tutorial I will give a simple tutorial of flashing Samsung Galaxy S6 and S6 Edge.
- samsung galaxy s6 edge - Flashing Guide Samsung Galaxy S6 and Samsung Galaxy S6 Edge
  1. First backup your important data.
  2. Download software needed below
    – Download the firmware of your region for Samsung Galaxy S6 (SM-G920F)  here  and to S6 Edge (SM-G925F) here .
  3. Install Samsung driver on your computer
  4. Odin3_v3.10.6.zip extract the files and run Odin3_v3.10.6.exe
  5. Turn off your phone, go to the download mode by pressing the Power + Volume Down + Home simultaneously until moncul warning message, to enter in download mode press Volume Up.
  6. Plug data cable to phone and look at the Odin application window, make sure the ID: COM blue, indicating the data cable connected to your computer (see figure 1)
  7. Input file Firmware Samsung Galaxy S6 and S6 Edge that had been downloaded to the AP on the Odin application (see Figure 1)
    - samsung galaxy s6 root odin - Flashing Guide Samsung Galaxy S6 and Samsung Galaxy S6 Edge
    Figure 1
  8. Click Start, the root process will run and wait for it to appear PASS writing, after which the phone will restart automatically
  9. Finished
  10. Congratulations, Samsung galaxy S6 / S6 edge you’ve succeeded in flashing.

Thanks

- pinit fg en rect red 28 - Flashing Guide Samsung Galaxy S6 and Samsung Galaxy S6 Edge